Phoenix USB Pro All Version Free Download

How to use

• Step 1: Download and install the Android USB Driver for the device on the  Windows  PC.
• Step 2: Download and extract the Phoenix Pro on the  PC. After Extracting you will see some files.
• Step 4: Download the Stock ROM which you want to Flash on the  Android Device. Extract it on the PC.
• Step 5:  Open the  PhoenixUSBPro.exe   on the  Computer.
• Step 6:  When the  Phoenix USB  launched.  Click on the Key Button from the Top.  Select the key file which comes with the tool.
• Step 7:  Click on the Image button.  Locate the .img firmware.
• Step 8: Click on the Start button.
• Step 9:  You will see a Big Green Tick Mark on the left. It means everything is ready to flash the firmware.
• Step 10:  Hold the Volume Down key.  Connect the  Android Device to the PC  using the USB cable.
• Step 11:  While holding the Volume Key.  Press the Power Buttons 3 times.  Then release the Volume Down Key.
• Step 12:   When it will detect the device, the Flashing process will begin automatically.
• Step 14:  Close the application.  Disconnect the  Android Device from the PC.
• Congratulations.
• Mind it
• 1) Allwinner Technology Co. Ltd. Develop the Phoenix USB Pro flash tool. So, all credits go to them.
• 2) If you face any mistakes while downloading or installing the tool, drop a comment below.
• 3) If you are searching for an alternative tool to flash the firmware. Download the LiveSuit or PhoenixSuit and use it.
• 4) You can use the application to flash firmware in the following Allwinner Chipsets.  A10, A13, A20, and A31. Also, you can install the tool on all versions of  Windows operating system.